Candle Care
Before lighting your candle make sure wick is trimmed to 1/4 inch. The shorter height allows the wax to capillary up the wick to feed the flame properly and get a more even burn.
​
To maximize burn time make sure to burn candle up to the 4 hours the first time to get an even melt pool and start the "memory" of the candle. If you do not let the wax pool melt to the edges you will create "tunneling" and get an uneven burn.
​
TIP: Did you know that you can put your candle in the freezer for 30 min before each burn? Soy wax is a softer wax. By putting it in the freezer you are hardening the wax and making it cold which would then take longer for it to reach its melting point. Therefore giving you a longer burn time.
​
WARNING: Make sure to burn it on a heat resistant surface. Away from children and pets. These tins can get HOT.
​
Never leave candle unattended.
​
​
How To Remove Stones
When wax has melted low enough to see the metal clip it is time to stop burning your candle.
Let the wax cool and harden. DO NOT try and remove stones when it is still hot.
Pull out stone and continue using as home décor and to remind you of intentions.
​
To remove beads and clean tin, flip upside down in strainer and run HOT water on the bottom of tin. After it loosens the wax will pop right out. Pick out beads and discard bigger pieces of wax into garbage. Rinse with soap and warm water. Use our jewelry kit to make jewelry or save in dish.
​
Check out @sparkandstoneco on Instagram for videos and ideas!